Waterproof
Plug and play
Easy installation without drilling hole
Note: the camera you received may not look exactly the same as picture because molding keep on updating, but they are guaranteed to fit to your car. The design trends is to utilize original bulbs instead of the built-in LED lights, this is a good solution to keep the license plate light consistent.
More information: most of cars came with two bulbs above the license plate, usually they are in warm color, while built-in LED are in cool color, this caused color inconsistent if you installed a camera with built-in LEDs.
|
Product Specifiction |
For CCD Lens |
For CMOS Lens |
|
Image Sensors |
SONY CCD lens |
Color CMOS lens |
|
IP rating |
Ip68 |
Ip68 |
|
TV System |
PAL or NTSC |
NTSC or PAL |
|
Effective Pixels |
628×582/628×492 |
580×540/580×492 |
|
Sensing Area(mm) |
4.9×3.7 |
|
Resolution(TV Line) |
480 |
420 |
|
Horizontal Sync Frequency (KHZ) |
15.625/15.734 |
|
Vertical Sync Frequency (HZ) |
50/60 |
|
Video output |
1Vp-p,75Ohm,RCA male |
|
Gamma Consumption |
0.45 |
|
AGC |
Auto |
|
BLC |
Auto |
|
S/N Ratio |
Betterthan 48dB |
|
Lens Angle (Deg.) |
170°diagonal |
|
Current Consumption (mA) |
200 |
180 |
|
Power Supply (DCV) |
12V |
|
Operating Temperature (Deg.C) |
-20~+70(RH95%MAX.) |
|
Storage Temperature (Deg.C) |
-40~+80(RH95%MAX.) |
|
Size |
Same as the number plate reversing lamp of the original car |
|
LED lamp |
Inside the camera if camera has built-in LED light |
|
Power Supply (DCV) |
12V |
|
Light color |
Thin yellow |
|
Current Consumption (mA) |
30~60mA |
|
Operating Temperature |
-20~+100 |
|
Storage Temperature |
-40~+120 |